Designer Perception and Design Thinking in Industrial Ceramic Product Development
DOI:
https://doi.org/10.21834/ebpj.v7iSI9.4260Keywords:
Design thinking, Form-giving, Ceramic Design, Product Development.Abstract
This paper discusses the methods used to conduct designer perception and design thinking in industrial ceramic product development. The designers themselves struggle to clarify how they make the association that immediately them to be the outcome and why those decisions are rational because the thinking behind design is not completely comprehended. This research attempt to identify product design development in critical design situations, empirically test the design thinking process towards industrial ceramic design processes and establish an innovative technique for capturing the ceramic designer’s thinking process. Exploiting a mix of aesthetics, ethics, and knowledge, design thinking is a contemplative longing to maneuver a new schematic in design development.
References
Abidin, S. Z., Sigurjonsson, J., Liem, A., & Keitsch, M. (2008). On the Role of Formgiving in Design. International Conference On Engineering And Product Design Education. (pp. 365-370). Barcelona: Design Society.
Aman. A. (2017). Design and Analysis of Wudu' (Ablution) Workstation For Elderly In Malaysia. (Master of Engineering, University of Malaya, Malaysia). Retrieved from http://studentsrepo.um.edu.my/7828/ DOI: https://doi.org/10.1088/1757-899X/210/1/012069
Anwar, R., Abidin, S.Z., Hassan, O.H. (2015). A Pattern in Formgiving Design: Giving Priority to a Principle Solution in Industrial Design Situation. In: Gen, M., Kim, K., Huang, X., Hiroshi, Y. (eds) Industrial Engineering, Management Science and Applications 2015. Lecture Notes in Electrical Engineering, vol 349. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-47200-2_35 DOI: https://doi.org/10.1007/978-3-662-47200-2_35
Anwar, R. (2016). Characterizing a syntactic pattern of formgiving in design thinking process. PhD Thesis. Universiti Teknologi MARA
Anwar, R., Abidin, S. Z. & Hassan, O. H. (2016). In-vitro design protocol: Artificial situation strategy uses to comprehend designers thought. EDP Sciences: MATEC Web of Conferences. Vol. 52 DOI: https://doi.org/10.1051/matecconf/20165203002
Anwar, R., Vermol, V.V., Mujir, M.S. and Hassan, O.H. ( 2017) Ablution function mean analysis: a prototype design strategy for sub-sanitaryware manufacturing Journal Advanced Science Letters Volume 23 Issue 11 pp.10806-10810 DOI: https://doi.org/10.1166/asl.2017.10158
Anisah, Popy Yuliarty, and Ryini Anggraini. 2019. “Perancangan Tempat Wudhu Ergonomis Berdasarkan Antropometri Pengguna. (Studi Kasus Pada Mall Abc, Jakarta Barat).” Jurnal PASTI XII (3): 284–90. https://publikasi.mercubuana.ac.id/index.php/pasti/article/view/4982.
Akner-Koler, C. (2000). Three-dimensional visual analysis. Reproprint, Stockholm.
Chien, C.-F., Kerh, R., Lin, K.-Y. and Yu, A. P.-I. (2016). Data-driven innovation to capture user-experience product design: an empirical study for notebook visual aesthetics design. Computers & Industrial Engineering, vol. 99, no. 9, pp. 162– 173. DOI: https://doi.org/10.1016/j.cie.2016.07.006
Hasbi, Sarah Aliya Che, and Sufian Mamat. 2020. “The Ergonomics of the Islamic Ablution: Exploring Considerations for the Elderly in the Mosque.” Cultural Syndrome 2 (1): 59– 77. https://doi.org/10.30998/cs.v2i1.323. DOI: https://doi.org/10.30998/cs.v2i1.323
Hongjun, Y. and Guangfang, N. (2013). e construction of a research framework for the knowledge consulting capabilities of digital libraries in the era of big data, Modern Information, vol. 33, no. 11, pp. 25–28.
Hubka, V., & Eder, W. E. (1996). Design Science: Introduction to the Needs, Scope and Organization of Engineering Design Knowledge. London: Springer-Verlag. Hsien-Hui Tang (2001). Exploring The Roles of Sketches And Knowledge In The Design Process. DOI: https://doi.org/10.1007/978-1-4471-3091-8
Jalil, M. K. A. (2000). Proses dan Kaedah Reka Bentuk. Penerbit UTM.
Kumar, M., Townsend, J. D. and Vorhies D. W. (2015). Enhancing consumers’ affection for a brand using product design. Journal of Product Innovation Management, vol. 32, no. 5, pp. 716–730. DOI: https://doi.org/10.1111/jpim.12245
Ilevbare, I. M., Probert, D. & Phaal, R. (2013). A Review of TRIZ, and Its Benefits and Challenges in Practice. Technovation, 33(2–3), 30–37. https://doi.org/10.1016/j.technovation.2012.11.003 DOI: https://doi.org/10.1016/j.technovation.2012.11.003
Needham, R. & Hill, P. (1987). Teaching Strategies for Developing Understanding in Science. Centre for Studies in Science and Mathematics Education, University of Leeds. Nitin, V., Khan, I. A. and Vikran, S. (2006). Ceramic tile process modeling for quality improvement using ANN,” in Proceedings of the 2006 IEEE International Conference on Industrial Technology IEEE, pp. 2896–2900, Mumbai, India.
Raif, D. M., Anwar, R. and Baharom M. K. (2022). Influences of Gestalt Principles in Form-Giving: Industrial ceramics design Journal Environment-Behaviour Proceedings Journal 7(SI7). pp.227-233 DOI: https://doi.org/10.21834/ebpj.v7iSI7.3787
Raif, D. M., Anwar, R. and Baharom M. K. (2022). Empirical Identification of Perceptual Design Criteria for Ablution Concept. Journal Environment-Behaviour Proceedings Journal. 7(SI7). Pp.199-206 DOI: https://doi.org/10.21834/ebpj.v7iSI7.3783
Sarah, S. Y., Lam, K. K. and Smith, E. A. E. (1999). Prediction and optimization of a ceramic casting process using a hierarchical hybrid system of neural networks and fuzzy logic, Ieee Transactions On Design And Manufacturing, vol. 32, 1999. DOI: https://doi.org/10.1080/07408170008963881
Suh, N. P. (1990). The Principle of Design. New York: Oxford University Press.
Taib, J. M., & Hanafiah, K. A. (2006). Reka Bentuk Berbantu Komputer-Asas Pemodelan. Penerbit UTM
Tayal, S. P. (2013). Engineering Design Process. International Journal of Computer Science and Communication Engineering IJCSCE Special issue on " Recent Advances in Engineering & Technology, 1–5
Xing, L. (2013). Discussion on the evaluation and assessment of accountants’ ability. Friends of Accounting, vol. 33, pp. 35–38. Yanhua, H. (2011). How to cultivate the lifelong learning ability of accountants,” Friends of Accounting, vol. 35, pp. 124–126.
Yueming He (2022), ‘Research on Innovative Thinking of Ceramic Art Design Based on Artificial Intelligence’ Hindawi Mobile Information Systems Volume 2022, Article ID 3381042. DOI: https://doi.org/10.1155/2022/3381042
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Diana Mohamed Raif, Rusmadiah Anwar, Siti Noor Azila Noordin, Zuraidy Abd Rahim
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
