Lithophane Art Process Setting in Using 3D Printing Technology

Muhammad Sukor Romat; Noor Azzanny  Jamaludin

doi:10.21834/ebpj.v7iSI9.4305

Authors

Muhammad Sukor Romat College of Creative Arts, Universiti Teknologi MARA,40450, Shah Alam, Malaysia
Noor Azzanny Jamaludin Faculty of Education and Liberal Arts, INTI International University, Nilai, Malaysia

DOI:

https://doi.org/10.21834/ebpj.v7iSI9.4305

Keywords:

Lithophane, Process Setting, 3D Printing Technology

Abstract

This study is to develop a 3D printing method for producing lithophane. Images created by Lithophane are three-dimensional and change depending on the light source behind them. By heating the lithophane to the melting point and depositing layer by layer, a 3D-printed lithophane model was created. For the 3D-printed lithophane model, the ideal thickness is 3 mm, white is the appropriate colour, and the light intensity and distance is 50 mm, according to this research. This study is significant because it contributes to the advancement of 3D printing technology's ability to produce high-quality lithophane and opens up new knowledge perspectives.

References

Brooks, H., Lupeanu, M., & Abram, T. (2012). Production of Personalized Lithophane Lighting Products Using AM. Published by DAAAM International Scientific Book.

Jung, Soonchul & Choi, Yoon-Seok & Kim, Jin-Seo. (2020). Stencil-based 3D facial relief creation from RGBD images for 3D printing. ETRI Journal. 42. 10.4218/etrij.2018-0371. DOI: https://doi.org/10.4218/etrij.2018-0371

J. Weiler et al. (2019). Lithobox: Creative practice at the intersection of craft and technology. TEI '19: Proceedings of the Thirteenth International Conference on Tangible, Embedded, and Embodied Interaction. ACM ISBN 978-1-4503-6196-5/19/03.

Ngo, Tuan & Kashani, Alireza & Imbalzano, Gabriele & Nguyen, Kate & Hui, David. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications, and challenges. Composites Part B Engineering. 143.10.1016/j.compositeb.2018. 02.012 DOI: https://doi.org/10.1016/j.compositesb.2018.02.012

Nulty, A.B. 3D Printing Part 1 - A History and Literature Review Of 3D Printing in Dentistry. Preprints 2021, 2021050221 (doi: 10.20944/preprints202105.0221.v1). DOI: https://doi.org/10.20944/preprints202105.0221.v1

Sammy Ekaran, 3D Printed Lithophane- Turn Your Art and Photos into Lithophanes, Retrieved from https://3dwithus.com/3d-printed-lithophane-art-photos-into-lithophanes, date of access 11th August 2020.

Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019). An overview on 3D printing technology: Technological, materials, and applications. Procedia Manufacturing, 35, 1286– 1296. https://doi.org/10.1016/j.promfg.2019.06.089 DOI: https://doi.org/10.1016/j.promfg.2019.06.089

Stephen Hoskins,”3D Printing for Artists, Designers and Makers. (2013). Published by Bloomsburg Publishing Picture.